Water testers

Show:
Sort By:
Water testers

How much product should I add to my water?
To know how much product to add to your pool or spa water, you first have to measure. To measure there are different measuring instruments on the market, with us, you can choose from a wide range of measuring instruments
Besides the measuring instruments, we also offer the corresponding calibration liquids and tablets.


Yellow 4-in-1 test strips 
For a quick and easy measurement of your pool water so you an swim safely. With these test strips you can measure 4 important values: Free chlorine, pH, total alkalinity, cyanuric acid (This is important for outdoor pools and pools that are subject to chlorine degradation by UV rays).  
Properties:

  • 50 strips per box.
  • User-friendly easy-grip bottle with convenient opening at the top.
  • Close the box immediately and do not leave it in the sun, because the test strips are subject to humidity.

Application
Use: measure your water 2 times a week

  1. Hold a test strip in the water for a moment;
  2. After 15 seconds you can compare the colours on the test strip with the colours on the packaging;
  3. Correct the calues if necessary;
  4. If you have added product, check your water again after 4 hours.

Aquacheck 7 test strips
For quick and easy measuring of your pool water so you can swim safely.
You can measure 7 important values with these test strips:
Total chlorine, free chlorine, total hardness, total bromine, pH, total alkalinity and cyanuric acid.

Properties

  • 50 strips per box.
  • Close the box immediately and do not leave it in the sun, because the test strips are subject to humidity.

Application
Use: measure your water 2 times a week.

  1. Hold a test strips in the water for a moment;
  2. After 15 seconds you can compare the colours on the test strip with the colours on the packaging;
  3. Correct the values if necessary;
  4. If you have added product, check your water again after 4 hours.

 

    Salt test strips
    Test strips for salt pools. Indispensable in any pool with a salt electrolysis if you want to keep the water quality optimal.
    With these test strips you can check 5 values: 
    Free chlorine, pH, total alkalinity, cyanide and salt. 
    Properties

    • 10 salt test strips
    • 25 test strips of chlorine

    Application
    Use: measure your water 2 times a week.

    1. Hold a test strip briefly in the water;
    2. After 15 seconds you can compare the colours on the test strip with the colours on the packaging;
    3. Correct the values if necessary;
    4. If you have added product, check your water again after 4 hours.

     

      Teststrips Bayrol Quicktest
      With the Bayrol Quicktest test strips the following values are measured quickly: free chlorine, pH, alkalinity and algacide.
      Properties

      • 50 strips per box.
      • User-friendly easy-grip bottle with convenient opening at the top.
      • Close the box immediately and do not leave it in the sun, because the test strips are subject to humidity.

      Application
      Use: measure your water 2 times a week. 

      1. Hold a test strip in the water for a moment;
      2. After 15 seconds you can compare the colours on the test strip with the colours on the packaging;
      3. Correct the values if necessary;
      4. If you have added product, check your water again after 4 hours.

       

      Checker plus digital pH tester
      Digital pH tester of the brand Hanna. The tester is specially designed for measuring pH quickly and easily. . 
      Properties

      • One touch of a button. 
      • Replaceable pH electrode
      • Operates on supplied battery with a life of +- 1000 hours.  

      Application
      Use: measure your water 2 times a week.

      1. Calibrate the appliance when it is first used and afterwards as maintenance of the appliance depends on its use;
      2. Remove the black protective cap before measuring;
      3. Place the electrode 4 cm deep in the sample (beaker with water to be measured);
      4. Shake the electrode very gently in the sample and wait until the icon on the top left has disappeared;
      5. The pH value will now appear on the display;
      6. When several samples have to be measured in succession, rinse the electrode before each new measurement;
      7. Use Hanna cleaning fluid to chemically clean your pH electrode. 

       

        Checker digital chlorine tester
        Digital chlorine tester from the brand Hanna. 
        Properties

        • Do not hold the instrument under water
        • Very accurate meter
        • Works with the inclueded reagent powder.

        Addition
        Use: measure your water 2 times a week.

        1. Press the round button to switch the meter on;
        2. Fill the enclosed cuvette (glass jar) up to the mark with pool or spa water. Place the cuvette in the meter and close the lid;
        3. Press the button again. The meter is now set to zero= 'ZERO';
        4. Remove the cuvette from the meter and add one bag of free chlorine reagents to the cuvette. Shake briefly to dissolve the powder. Reinsert the cuvette into the meter and close the lid;
        5. Wait one minute and then press the button;
        6. The result of the measurement now appears on the display. 

         

          Trutest digital test strip reader
          The water test strips are digitally analysed by the test unit, this recognising even the smallest colour deviations. The result is shown on the clearly laid-out display in truly exact units: 
          Free chlorine, pH, total alkalinity. 
          Features

          • Results are displayed with low, ok or high indicators. 
          • You can read the last 9 test results.
          • Water resistant digital water tester. 

          Addition

          1. Turn on the device by pressing On/Offf button
          2. Press the start button and simultaneously dip a strip into the water. Immediately remove the test strip from the water and shake the excess water from the strip with a simple flick of the wrist.
          3. Place the strip in the back of the channel with the coloured squares facing down. DO NOT SLIDE THE TEST STRIP OVER THE GLASS.
          4. Wait for the results. (Do not hold the strip.) Digital results for free chlorine, pH and total alkalinity appear within seconds. Check the status of your results for each parameter. The status LO=low, OK=ideal, HI= high is shown to the left of each digital value.

            Scuba II electronic pool water tester
            The operation of this water tester is fast and simple. Fill the small glass cuvette with water from your pool, let one of the tablets (of the value you want to measure) dissolve in it and read the values on the LCD display. If you want to test a different value afterwards, put new water in the cuvette and use another tablet that is suitable for the value you want to measure. When you have finished measuring, rinse and dry the cuvette (the sample chamber) dry. 
            You can check 5 values with this tester:
            Free chlorine, Total chlorine, pH, alkalinity and cyanic acid. .
            Features

            • Power supply: 2 batteries
            • Waterproof water tester

            Application
            Use: measure your water 2 times a week

            1. Switch the device ON/OFF;
            2. Fill the sample chamber completely with water by immersing it. While doing so, swivel the device back and forth slightly. Remove the appliance from the water; 
            3. Close the sample chamber with the lid;
            4. Presse the ZERO/TEST button. 000" will flash for approx. 8 seconds. Afterwards the display shows "0.0.0". .
            5. Select analysis with the MODE button: CL (Free chlorine/total chlorine) apH a TA a Cya a CL... (scroll) .
            6. Remove the lid and add the required tablet.
            7. Crush the tablet with the stirring rod and dissolve it completely by stirring. 
            8. Close the sample chamber with the lid again. Swirl the apparatus back and forth for 15 seconds, do not shake. 
            9. Then hold the apparatus still and wait
              15 sec: CIF (free chlorine) / pH / CyA (cyanic acid)
              2 min: CIT (total chlorine) / TA (alkalinity) 
            10. Press button "Zero/Test". A bar symbol "---" flashes for approx. 6 seconds. The result (mg/l) appears on the display. Or: 
              Repeat test Press button "ZERO/TEST".
              Other method Take new sample. Press and scroll the mode button. Tests to be performed
              New zero setting (option)
              Press button "ZERO/TEST" for 2 sec.